Eventually I plan on getting a set of alloy rims for my CB550F https://4into1.com/rising-sun-rim-sp...=instocknotify
Does anyone know of a GOOD wheelwright in the lower North Island.
Thanks for your input in advance.
Kind regards
Bonez
Eventually I plan on getting a set of alloy rims for my CB550F https://4into1.com/rising-sun-rim-sp...=instocknotify
Does anyone know of a GOOD wheelwright in the lower North Island.
Thanks for your input in advance.
Kind regards
Bonez
Closer to you than you may think....
https://yellow.co.nz/y/hamco-industries-palmerston
He made up a top set of wire wheels for my supermoto bike.
36 or 40 spoke? 36 is simple, 40 a bit cunty, why don't you do it yourself? jig it up as it is, then use that jig to set the new rims, then get someone else to check it. 36 means each spoke is ten degress apart and 0with that there's always an opposite, 40 not so.
Thank you guys for the suggestions.
Spyda I'm using the existing hub so all the old spokes will be cut in half and removed.
and take photos of spoke pattern before you start !
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks